SDS-2500 USER MANUAL V1.0
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 27
When IN4 is pressed, input 4 will be displayed on the video wall and the LCD screen will update to show:
9
RS232 CONTROL
It is possible to control the SDS-2500 via RS232, this enables the unit to be located in a remote location where
the user cannot use front panel or infra-red control.
Refer to section 5.1 of this manual to see the port specifications for the D9 connector on the rear of the SDS-
2500.
To use with a PC or Laptop which does not have a serial port in built a USB to D9 adapter can be utilised.
Please ensure the adapter used is compatible with your PC or laptop.
A PC application, HDMI-944F, is made available from the Smart-e website. This gives a greater degree of
control for advanced users. A separate manual is provided for the use of this software application.
Users can use the above setup to control the SDS-2500 via TELNET or any other serial communication
application. In conjunction with the SDS-2500 protocol (available in a separate document) this can offer all the
means of control available in the control application. This can also be utilised to connect the SDS-2500 to third
party controllers such as AMX or control 4 to enable users to integrate the SDS-2500 in to the control system
of their wider AV installation.
D9 male to male or male to female lead
up to 5m in length
Summary of Contents for Sds-2500
Page 1: ......
