SDS-2500 USER MANUAL V1.0
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 22
8.2
VIDEO FORMAT SELECTION
The input section of the handset as shown below is concerned with selecting the appropriate video input
format.
Firstly, press the input number for which you wish to change the video format. As an example to change input
3 from HDMI to VGA, first press the input 3 button. The LCD display will update to show the input video format
selection screen, with number 3 flashing to indicate this is the input being controlled.
The input will flash for 5 seconds, within this time you should press the input format required, if a command is
not received within 5 seconds the unit will exit the input format selection. For this example when input 3 is
flashing the VGA button should then be pressed, the LCD will then update to show the change.
With no further inputs from the user the LCD screen will then return to its previous state.
Summary of Contents for Sds-2500
Page 1: ......
