SDS-2500 USER MANUAL V1.0
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 13
The other option is to use the 4 rubber mounting feet. These come fitted to the SDS-2500 out of the box. They
have a soft underside so can be used on any surface but please ensure the unit is kept level during operation
to ensure good airflow through the ventilation panels on the side of the SDS-2500.
Each rubber foot is held in place with a pan head screw, these can be removed using a Philips head screwdriver
if desired.
6.2
SIGNAL CONNECTIONS
All of the input and output connections are located on the rear of the SDS-2500. For a more detailed
breakdown of these connections refer to section 3 of this manual.
Firstly connect all of the video inputs and outputs required. It is ok to connect multiple mixed format inputs to
the unit at the same time, for instance you could connect active HDMI, VGA, composite and stereo audio inputs
to their respective connectors. Refer to the latter sections of this manual to see how to then switch between
them during operation.
Next connect all of the required PC Control and/or infra-red connections.
Once all of these connections have been made you may attach the provided 12V plug top power supply. Firstly
attach the screw lock terminal. Finger tighten the screw lock, do not over tighten.
Once safely connected the mains adapter side of the power supply can be attached to a mains socket. Please
take note of the input voltage range as detailed on the power supplies label, this can vary by region.
Summary of Contents for Sds-2500
Page 1: ......
