SDS-2500 USER MANUAL V1.0
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 23
8.3
CROSSPOINT SELECTION
–
MATRIX MODE
The user can change the video crosspoints when the unit is in matrix mode using buttons A-D in the output
section of the handset and buttons 1-4 in the input section of the handset.
Firstly press the output button for which you wish to change the crosspoint. If we start with the example of all
outputs set to input 1.
If you wish to for example change output D to input4, first press the Output D button. The D icon on the LCD
will flash to show it is the selected output. D will flash for 5 seconds, within this time the required input button,
in this case 4, should be pressed to make the crosspoint change. The LCD will update to show the change.
If no input button was to be pressed within 5 seconds the output selected would stop flashing and a new output
button would need to be pressed to reinitiate a crosspoint change.
Summary of Contents for Sds-2500
Page 1: ......
