SMART Board SmartBoard 600i2, Configuration And User'S Manual

Page: 47 / 74

99-00850-21 B0 Maintaining Your 600i2 Interactive Whiteboard System 37
6. Remove the new lamp from all of its packaging.
Remove the plastic labeling on the lamp handle.
Press the tab, put the new lamp into the lamp slot
and push it all the way down. Release the tab.
7. Tighten the lamp locking screws until the new lamp
is secure.
8. Put the inner lamp cover back into its original
position. Retrieve the inner lamp cover screw from
step 3, and then insert it in its slot. Tighten the
screw until the inner lamp cover is secure.
9. Put the outer lamp cover back into its original
position. Align the cover and tighten the screws
until the outer lamp cover is secure.