SMART Board SmartBoard 600i2, Configuration And User'S Manual

Page: 29 / 74

99-00850-21 B0 Before Installing Your 600i2 Interactive Whiteboard System 19
To lock the pen tray to the interactive whiteboard
Underneath the pen tray, there is a Kensington® security slot that accommodates a security cable, such as a
Kensington® lock.
Security Slot
Loop the security cable behind the pen tray brackets before you screw them to the wall, and then thread the lock
end of the cable through the loop end of the cable. Verify that the cable is tight enough to prevent you from
removing the pen tray while the lock is in place. Install the pen tray. Insert the prong end of the security cable into
the security slot, and then complete the pen tray installation.
To secure the pen tray to the pen tray brackets
Because you can remove the pen tray without tools, you may want to securely attach it to its brackets. To do this,
you can insert two No. 8/M4 screws (not included) into the holes shown in the illustration below. Note that older
pen trays don’t have this feature.
Screw Location