SMART Board SmartBoard 600i2, Configuration And User'S Manual

Page: 59 / 74

99-00850-21 B0 Remote Management of Your 600i2 Interactive Whiteboard System 49
NOTES
• To see a list of available commands, type ? and then press ENTER.
• When you’re using a terminal emulation program, turn on your program’s local echo setting if you want to
see characters as you type them.
Timing and Command Processing
The Unifi 45 projector responds to commands only at certain power levels and times. There are four projector
power states:
• Idle (standby)
• Powering (startup)
• On (operating)
• Cooling (standby)
The embedded firmware program coordinates command sequencing and is capable of buffering up to 127
commands. In each power state, the buffer accepts valid commands until the program can process them.
NOTES
• In the On state, a five second delay occurs after every input source change. The program doesn’t process
commands during this delay.
• In the On state, if the current input source doesn’t send a signal, a black screen with the SMART
Technologies logo—a “Command Failed” message appears when you type contrast and brightness
commands.
Command Inventory
The Unifi 45 projector responds to the commands in the tables on the following pages.
NOTES
• Commands aren’t case sensitive.
• Type commands exactly as they appear in the left column of the tables, except for number variables, which
are represented by ××, and positive/negative variables, which are represented by
± .
Power State Commands Accepted
Idle The buffer accepts all valid commands
The system processes the get fwver , get bootver ,
get input , get powerstate and on commands
Powering • The buffer accepts all valid commands
• The program doesn’t process commands
On • The buffer accepts all valid commands
• The program processes all valid commands
Cooling • The buffer accepts all valid commands
• The program doesn’t process commands