51
5251
5
2022
-
SPS-B
MG_0299
After final installation of the fins place the Fin Location Labels to appropriately identify the location of the fins underwater.
Safety Labels
T
o ensure crane operators and swimmers are aware of the fin’s location and operation area, please mount the safety labels
on the hull
Use sissors to cut the end arrow sysmbols on the label.
Place the label to the hull and place the end arrow labels to cover the length of the stabliser fin.
Label designs
Height text: 44 mm
Height arrows: 63 mm
Length: 1200 mm
Adjus
table length, fits a
ll Sleipner Vector Fins™.
For application, get your and follow instructions in the manual.
Fin Location Label
Fin System Interface
21. On the stabilizer panel, Touch HOME.
22. Touch STARTUP and MAINTENANCE
23.
Touch STARTUP (Password is 1234 - enter)
24.
Touch FIN INSTALLATION
25.
Touch MOVE ACTUATORS MANUALLY (This allows you to open/FLOAT actuators from the panel, without the need to manually open the fi n valve
unit described in step 3/18. (Step 3 and 18 can be excluded). It requires that Stabilizer control and hydraulic system is wired and connected with
24V power supply.)
26. (a) Touch FLOAT - turn actuators to out most position according to step6
(b) Touch LOCK when desired position is achieved
(c) Install fi ns according to step 1-20
(d) Touch RETURN when completed
MC_0219
MG_0265
21
22
23
24
25
26