43
5251
5
2022
-
SPS-B
MG_0240
Fin Installation
VECTOR FIN
Shaft cover bolts
(MAX torque 5 Nm)
Shaft cover
Oil port plugs
(2 PCS) (MAX torque 15 Nm)
Nuts (12 PCS) (MAX torque 60 NM)
Special locking washer (12 PCS)
Actuator
Hull
Shaft cover (opposite side)
Fin Installation
Correct actuator position for fi n shaft installation
The following fi gures illustrate the position the stabilizer actuator assembly cylinders must be positioned in relation to the fully outboard position of
the relevant fi n.
When viewed and seen from inside/above the relative Stabilizer Actuator assembly:
- Rotate the Port Actuator fully to clockwise.
- Rotate the Starboard Actuator Fully counter clockwise.
- See Transversal fi n positioning section.
MC_0219
IMPORTANT
During FIN INSTALLATION procedure, fi ns/actuators can/will move, ensure that health and safety measures will be taken
MG_0241
BOW
Port Actuator
Starboard Actuator
STERN