Manual_MCS_I_2021-10-002.00_EN.docx
7
1.9 SAFETY EQUIPMENT
The MCS I can be stopped safe by just pressing „break“ which will lead to put on the
last necessary coverglass so nothing will dry out during this break and then releasing the
cover. In this case a restart is offered by the MCS I. For some reason it can be necessary
to have the unit stopped immediately. In this case you have to push the “ON/OFF”
button, which will directly stop the running process, release the cover and cut the power
of the motors. The MCS I confirms this “Emergency Stop” by an Alarm and a message
on the screen. Pushing „ON/OFF“ again will switch the unit into stand-by mode. During
normal process the safety covers prevent users from being hit by moving parts inside.
1.10 CASE OF EMERGENCY
For an instant emergency stop just push the „ON/OFF“ switch, as mentioned in point
1.9 „Safety Equipment“. This will directly stop the running process, release the cover
and cut the power of the motors. The MCS I confirms this “Emergency Stop” by an
Alarm and a message on the screen. Pushing „ON/OFF“ again will switch the unit into
stand-by mode. For cutting the complete Power supply, just switch the main switch on
the right side of the unit or pull out the cable.
