6
Manual_MCS_I_2021-10-002.00_EN.docx
1.4 EMISSIONS
The emissions of solvent steams due to the use of reagents and chemical glue inside the
MCS I are reduced by the powerful fans and the charcoal filter (to be exchanged
regularly) of the MCS I exhaust system. A connector to your central exhaust system is
integrated, so the machine can also be run without filter.
1.5 SOURCES OF DANGER
The work with reagents and medias, as they are used in laboratories to coverslip slides,
is always a danger for health and life. So also by using the MCS I be sure to follow the
common rules and regulations for work with these medias. Further danger can be
caused by the moving mechanical parts (step motor axes) inside the MCS I. For this
reason the safety covers normally prevent of touching moving parts. If one of the covers
are open, the software is not starting the process and an electronic safety board cuts the
power of the motors to offer a double safety.
1.6 AUTHORIZED USER / OPERATOR
Users, working with the MCS I, may only be those, who have been instructed by the
operator. The operator is responsible to third persons on the operating site. The
operator has to provide this instruction manual to the users and to make sure, the users
have read and understood it.
1.7 PERSONAL PROTECTIVE EQUIPMENT
Slides and baskets taken out of the MCS I after coverslipping may still be contaminated
by reagents or colours from the staining machine. So by taking out or by cleaning the
machine you may have direct contact. According to common safety regulations, it is
necessary to wear gloves to prevent contact with your skin.
1.8 SAFETY INSTRUCTIONS ON INSTALLATION SITE
The MCS I has to be installed only on a stable, even and solid basis to be sure, it stands
and works safely. A falling instrument means a big accident risk! Installation has to be
done by trained and certified Slee personal.
