Manual_MCS_I_2021-10-002.00_EN.docx
19
3.8.2 COVERGLASS POSITIONING
To adjust your coverglass more to the front or
more back on the slides, just press “SETUP” to get
into the SETUP menu. Then press “Change CG”.
The MCS I will go to a special position and release
the hood to have best possibility to adjust the
coverglass container to the CG-Head.
As shown in the left picture, by turning the
adjusting-wheel, the coverglass-box will go more to
the front or more to the back.
Be careful and read attentively!!!
Due to the fact, that the CG-Head has to get into
the coverglass box without crash, it is strictly
necessary to adjust also the CG-Head to the new
position of the coverglass box!!!
Read and follow the next step before leaving
the adjustment function if you changed the
position of the coverglass box!!!
To Check with your fingers, if space to get
into the coverglass box in front and on the
backside is equal so it should be perfect for
the CG-Head to get inside the box.
Read and follow the next step before
leaving the adjustment function if you
changed the position of the coverglass
box!
