20
Manual_MCS_I_2021-10-002.00_EN.docx
The CG-Head can also be adjusted by
just turning the adjustment-wheel (in
the upper area) as seen in the left
picture. So here again is the
information, to check with your fingers,
if space to get into the coverglass box
in front and on the backside is equal so
it should be perfect for the CG-Head to
get inside the box. See it in this picture:
The picture on the right again shows the
adjustment-wheel for the coverglass position.
When the position is perfectly adjusted, you
will need to check, if the separation pressure
(bending the coverglass) (fig. 1) is optimized
to your coverglass, as every glass has different
flexibility and separation characteristics! This
is explained in the next step