SKYZER TECHNOLOGIES
PAGE 18 OF 81
INGENICO 5100 ANZ VERSION 4.8 OPERATING GUIDE
Version 1.1
4 SETUP
4.1 FLOWCHART CONFIGURATION
4.1.1
Overview: Procedure to Activate ANZ Terminal
*
NOTE:
The entire Remote Key Injection (RKI) process is managed by EFTPOS
New Zealand when terminals are sent in for key loading. To remotely download
the keys to the terminal, program the terminal for Dial up connection and then
simply initiate a logon to download the keys and establish connectivity with the
ANZ host.
If the message
‘RKI INIT REQUIRED’
appears at attempted logon, then refer to
page 33
for instructions to perform RKI, then proceed to logon terminal.
TERMINAL CONFIGURATION
FUNC 3824
Configure the Terminal ID
and select preferred COMMS
mode.
1 – Dial up (Page 20)
*
2 – TCP-IP/Dial up (Page 21)
3 – TCP-IP (Page 22)
MERCHANT LOGON
(Page 39)
Press
ENTER
to scroll
through until
SUPERVISOR
menu is
displayed. Press the
SAV
to select
INIT
to perform
a logon
.
START
TERMINAL
CONFIGURATION
RECEIPT (Page 74)
Press
ENTER
to scroll
through until
SUPERVISOR
menu is
displayed. Press the
CHQ
to select
XTRA
to
perform
TERMINAL
FUNCTIONS.
Press
number
2
to display
KVC download on to
the terminal. Press
ENTER
to print off the terminal
configuration receipt.
OPTIONAL
