IDP 700 Terminal Series - Hardware Guide
© SkyWave Proprietary ix T206, Version 01
Preface
Purpose
This document is as an overview of the installation procedures and hardware
characteristics and specifications for the IDP-780
flex
1
and IDP-790
flex
dual-mode
terminals.
Audience
This document is for technical readers. It provides information to ensure successful
installation and operation of IDP-780
flex
and IDP-790
flex
dual-mode terminals.
Errata Sheet
Refer to the SkyWave Customer Support website for a possible Errata Sheet available
after the release of this document. Always check the site for the most current
documentation releases
Notation
Hardware components and hardware labels in this document may not be exactly as shown
and are subject to change without notice.
CAUTION
This safety symbol warns users of possible hazards to personnel,
to equipment, or to both. It includes hazards that will or can
cause severe personal injury, death, or substantial property
damage if the hazard is not avoided; and hazards that will or can
cause minor personal injury or property damage if the hazard is
not avoided.
Note:
A note indicates information with no potential hazard, but the user should
make special note. A note is also used to indicate points of interest or to provide
supplementary information about a feature or task.
Numbered lists indicate a series of steps required to complete a task or function.
Bulleted lists highlight information where order or sequence is not crucial.
Reference
The content of the following documents may be useful in conjunction with this guide.
These documents are available from the IDP Developer Toolkit or
[T200]
IsatData Pro Network Services Overview
1
The IDP 700 series
flex
includes the transceiver unit and a satellite antenna. The IDP-780
includes the standard satellite antenna and the IDP-790 includes the low elevation satellite
antenna.
Summary of Contents for IDP 700 Series
Page 70: ...www SkyWave com ...
