SkyWave IDP 700 Series, Hardware Manual

Page: 25 / 70

IDP 700 Terminal Series - Hardware Guide
© SkyWave Proprietary 13 T206, Version 01
3.6 Terminal Connector Layout
For detailed instructions on the connector contact crimp, assembly and extraction, refer to
the manufacturer’s website
5
.
Figure 11 Layout for P1 and P2 Connector
3.6.1 P1 White Connector Pin Assignment
Table 4 maps to the layout shown in Figure 11.
Table 4 Terminal P1 Electrical Pin Assignment (White Connector)
CAN L CAN H RS-232_1 Rx
(Input)
RS-232_1 Tx
(Output)
input4 input3 input2 input1 inputDigital7
24 23 22 21 20 19 18 17 16
reserved RS-485 A RS-485 B outputSink14 outputSink15 outputSink16 reserved inputDigital6 GND
07 08 09 10 11 12 13 14 15
reserved reserved inputDigital5 inputIgnition12
High voltage input
active high
inputExtPower13
(VCC, 9-48 VDC)
GND
06 05 04 03 02 01
3.6.2 P2 Gray Connector Pin Assignment
Table 5 maps to the layout shown in Figure 11.
Table 5 Terminal P2 Electrical Pin Assignment (Gray Connector)
outputSink18 reserved reserved reserved inputDigital11 reserved reserved reserved reserved
24 23 22 21 20 19 18 17 16
outputSink17 reserved reserved reserved reserved GND inputDigital8 inputDigital9 inputDigital10
07 08 09 10 11 12 13 14 15
reserved RS-232_2 Rx RS-232_2 Tx reserved reserved reserved
06 05 04 03 02 01
3.7 Input/Output Specifications
The terminal supports the following I/Os:

Four general purpose inputs configurable as either

Digital high-side input
5
http://www.te.com/commerce/DocumentDelivery/DDEController , document ID/document
number: 411-5761, document title: 040II SERIES MULTI-LOCK CONNECTOR MK-II 72POS.
Pin 16
Pin 15
Pin 01