IDP 700 Terminal Series - Hardware Guide
© SkyWave Proprietary 27 T206, Version 01
1.
Unscrew and remove the SIM card door, located on the left side of terminal, using a
small flat nosed screwdriver (Figure 19).
Figure 19 Remove SIM Card Door
2.
Orient the SIM card as shown Figure 20 with the notch facing you.
Figure 20 SIM Card Orientation
3.
Insert the SIM card into the SIM card holder slot (Figure 21) and push gently until
the card is all the way in (Figure 22). Use the main SIM card holder slot if only using
a single SIM card.
Note:
The SIM card only works in the orientation mentioned above.
Figure 21 SIM Card Holders
Figure 22 SIM Card Installed
4.
Repeat steps 2 and 3 if a second SIM card is required. Use the slot closest to the SIM
card door screw for the second SIM card.
Main
SIM Card
Holder Slot
Second SIM
Card Holder
Slot
Notch
Remove Door
Summary of Contents for IDP 700 Series
Page 70: ...www SkyWave com ...