IDP 600 Terminal Series - Hardware Guide
© SkyWave Proprietary vii T200, Version 02
Preface
Note:
Refer to the SkyWave Customer Support website for a possible Errata Sheet
available after the release of this document. Always check the site for the most
current documentation releases.
What's New?
Updates since the last release of this document are listed below.
Updated elevation angle for IDP-690 (-15 to +90) (Table 1)
Added power consumption information (Table 5)
Added new IDP 600 Series Extension Cable figure and updated details
(APPENDIX E)
Purpose
This document is as an overview of the installation procedures and hardware
characteristics and specifications for the IDP 600 series of terminals.
Audience
This document is for technical readers. It provides information to ensure successful
installation and operation of IDP 600 series terminals.
Notation
Hardware components and hardware labels in this document may not be exactly as shown
and are subject to change without notice.
CAUTION
This safety symbol warns users of possible hazards to personnel,
to equipment, or to both. It includes hazards that will or can
cause severe personal injury, death, or substantial property
damage if the hazard is not avoided; and hazards that will or can
cause minor personal injury or property damage if the hazard is
not avoided.
Note:
A note indicates information with no potential hazard, but the user should
make special note. A note is also used to indicate points of interest or to provide
supplementary information about a feature or task.
Numbered lists indicate a series of steps required to complete a task or function.
Bulleted lists highlight information where order or sequence is not crucial.
Reference
The content of the following documents may be useful in conjunction with this guide.
These documents are available from the IDP Developer Toolkit or
[T202]
IDP 600 Terminal Series Developer Guide
Summary of Contents for IDP-680
Page 64: ...www SkyWave com ...
