SkyWave IDP-680, Hardware Manual

Page: 32 / 64

IDP 600 Terminal Series - Hardware Guide
T200, Version 02 22 © SkyWave Proprietary
Parameter Description

Degreasers

Soap and Detergents

Steam

Waxes

Kerosene

Freon

Spray Paint

Paint Strippers

Ether

Dust Control Agents (magnesium chloride)

Moisture Control Agents (calcium chloride)

Ammonia

Aluminum brightener (acid wash)
Steam Cleaning and
Pressure Washing The terminal meets all of its specifications after a steam cleaning
and pressure wash test as detailed in SAE J1455, section 4.5.3.
Fungus The terminal meets all of its specifications after a fungus test as
detailed in SAE J1455, section 4.6.3.
Dust and Sand
Bombardment The terminal meets all of its specifications after a dust and sand
bombardment test as detailed in SAE J1455, section 4.7.3.
The terminal meets the acceptance conditions of IEC 60529,
section 13.6.2 after a dust and sand bombardment test as detailed
in IEC 60529, section 13.4.
Drop Test The terminal meets all its specifications after a handling drop test
as specified in SAE J1455, section 4.11.3.1.
ESD The terminal meets all its specifications after exposure of the
enclosure to 6 kV ESD contact discharge per
IEC 61000-4-2, level 3.
3.11 Temperature Sensor
Parameter Value
Range -40 to +85°C
Accuracy ±2°C (-25 to +85°C)
±3°C (below -25°C)