Skyjack SJ519 TH, Service Manual

Page: 21 / 108

21
SJ519 TH 216942AC
Function Tests Section 1 – Scheduled Maintenance
1.5-12 Operator’s Cab Controls
WARNING
Ensure that you maintain three points of contact to
mount/dismount the cab.
▪
Use the steps of telehandler to access operator’s
cab.
▪
Ensure door and windows (if equipped) are
secure and in proper working order.
▪
Ensure operator’s cab controls
1
are secured
with no visible damage.
▪
Ensure multi-functional joystick
2
is secured,
movements are not obstructed and, with no
visible damage.
▪
Ensure operator’s dash controls
3
are
properly secured, returned to their neutral
position, with no visible damage.
▪
Ensure capacity charts
4
are in place and are
legible.
WARNING
Do not operate the telehandler if capacity charts
are missing or not legible.
1.6 Function Tests
Function tests are designed to discover any
malfunctions before the Telehandler is put into service.
The operator must understand and follow step-by-
step instructions to test all Telehandler functions.
IMPORTANT
Never use a malfunctioning Telehandler. If
malfunctions are discovered, Telehandler must
be tagged and placed out of service. Repairs
to Telehandler may only be made by a qualified
service technician.
▪
After repairs are completed, operator must
perform a pre-operation inspection and a
series of function tests again before putting
Telehandler into service.
▪
Prior to performing function tests, be sure to
read and understand the “Start Operation”
section of the operating manual.
▪
For function test that are to be performed,
please refer to the operating manual that
corresponds to the correct serial number.
Found there will be detailed instructions for
which tests to perform, as well as how to
properly and successfully perform them.
NOTE
All-function motion alarm should sound while
operating any boom and drive function
3
1
2
4
3