Skyjack SJ519 TH, Service Manual, Page: 82 / 108

82
SJ519 TH 216942AC
Section 4 – Procedures 50 Hour or Weekly Routine Maintenance
5.3-3 Check Fork Pins
1. Check the condition of the fork pin.
2. Inspect for cracks and other deformations.
3. Replace if required.
Fork Pin
Figure 13 Fork Pin
5.3-4 Wear Pads Greasing
1. Ensure telehandler is parked on a firm level
surface.
2. Move the shift lever to neutral and engage park
brake.
3. Fully extend the boom to gain access to front
bottom wear pads.
4. Shut down the engine and dismount from cab.
5. With boom fully extended, smear grease along
the path of front wear pads.
Front
Wear Pads
Grease Points
Figure 14
Front Wear Pads
6. With boom fully extended, remove rear cover to
gain access to top rear slide pads.
7. Smear grease along the path of rear top slide
pads.
8. Fully retract the boom then fully extend it a few
times to ensure the path of slide pads is covered
with grease for maximum protection.
Upper Slide Pads Side Slide Pad Side Slide Pad
Figure 15 Rear Wear Pads
9. Shut down the engine and remove key.