SKY BLUE Hosted VoIP, User Manual

Page: 19 / 93

SkyBlue Hosted VoIP
User Guide
8-2 Other phone features
8.3 Paging
Paging (also known as Intercom) is a feature which allows one phone user to
press a key on their phone and for whatever they say to automatically come out
of another phone's speaker. The user of that other phone doesn't have to
answer their phone. It is often used in an executive/assistant pairing.
If you have a paging key on your phone, then to page the destination, follow
these steps:
Pick up your handset.
Press the paging key.
Speak into the phone. Your voice will automatically come out of the other
phone.
To finish paging, hang up the phone or release the paging key.
8.4 Account codes
If you have account codes configured on your line then once you have dialed a
number which requires a code, you will hear a tone. You will then need to dial a
special code before the call is connected.
Your system may use either validated or non-validated account codes. If your
system uses validated account codes then you must enter a specific code that
has been configured either by your administrator or by you. If your system uses
non-validated account codes you can enter any code so long as it is the right
length.
If you have account codes your administrator should have explained this to you
and told you what codes to use. For more on account codes see Section 18.4.
8.5 Headset
Most of the models of phones supported by your phone system allow you to
connect a headset. This allows you to make and take calls will keeping your
hands free for other tasks.
To connect a headset to your phone, turn the phone upside down and connect
the headset into the socket marked with the headset icon. To make or answer a
call using your headset, press the headset key on your phone.