DOL 535 • DOL 539
28
Technical Manual
Installation with detection
Number of detections
Setting the number of detections.
Detection name
Naming of detection e.g. according to placement, so that it can be recognized in the
menus and alarms.
Runtime after open de-
tection
Runtime after close de-
tection
Setting of how long the motors must run after opening or closing is detected. This is
to ensure that all scratching areas close/open and not just the scratching area
where the detection is mounted.
Adjust closing cycle
Closing ON time
: Setting the time the door to the scratching area will close while
closing.
Closing OFF time
: Setting the time the door to the scratching area will pause while
closing.
Scratching area opening
time
Scratching area closing
time
At installation without detection,
Setting the amount of time it takes to open and close the scratching area.
Opening of scratching area takes place continuously within the set time (05:00
mm:ss).
Closing of the scratching area takes place in a cyclic movement by alternating be-
tween closing and pausing (30:00 mm:ss). This is done to ensure that all animals
are on the outside before it closes completely.
Scratching area closing
ON time
Setting the time the door to the scratching area will close while closing.
Scratching area closing
OFF time
Setting the time the door to the scratching area will pause while closing.
3.5.10 Egg counter
Select the type of system that fits the setup of the livestock house and the egg counting.
For layers in cages there are 3 systems for automatic setup of the egg counting system. This is done based on
the information the user has entered in the menu
Technical | Manual installation | House type
and
House set-
tings
.
In the predefined setups the number of egg counters, egg positions and egg lifts are based on the number of
rows and tiers and the production controllers give them individual names.
Egg counting system
Select one of the egg counting systems:
User defined
: Used in livestock houses where a flexible setup of the egg counting
is required.
1 counter for the house
: For livestock houses with only 1 egg counter.
The 3 predefined setups for layers in cages:
Longitudinal
: For livestock houses with egg counters mounted on longitudinal
belts.
Cross belt with lift
: For livestock houses where egg counters are mounted on the
cross belt and the belt can be lifted to the individual tiers.
Cross belt with elevator
: For livestock houses where egg counters are mounted
on the cross belt and the eggs are transported via an elevator.
3.5.10.1 Predefined setups with cross belts
Number of cross belt
Enter the number of installed cross belts.
