Skope 400 A, Instruction Manual

Page: 52 / 68

48
The value can be changed with “Up/Down”. By pressing “OK”, you can store this parameter
and go to the next one. The value will remain stored even if the machine is disconnected from
the mains.
12.8.6 PUMP TIME DURING INITIAL DETACHMENT
The pump time during initial detachment occurs at the start of each variable detachment time
.
It is measured in minutes and seconds with a resolution of 1 second
.
The value can be changed with “Up/Down”. By pressing “OK”, you can store this parameter
and go to the next one. The value will remain stored even if the machine is disconnected from
the mains.
12.8.7 PUMP TIME DURING FINAL DETACHMENT
The pump time during final detachment starts before each set detachment time ends.
The value can be changed with “Up/Down”. By pressing “OK”, you can store this parameter
and go to the next one. The value will remain stored even if the machine is disconnected from
the mains.
water time
02:00 (mm:ss)
in.pump harv.t.
00:30 (mm:ss)