Skope 400 A, Instruction Manual

Page: 5 / 68

1
1. INTRODUCTION
1.1 WARNINGS

This device must be installed by a specialist technician.

Any modification necessary to the electrical installation for the perfect connection of the machine must
be carried out exclusively by professionally qualified and authorised staff.

To guarantee the efficient and correct operation of this device, it is essential to follow the manufacturer's
instructions, particularly with regard to maintenance and cleaning operations, which in most cases should
be carried out by qualified staff.

Actions by unqualified persons, apart from being dangerous, can cause serious faults. In case of a fault,
contact the distributor who sold it to you. We recommend that you always demand original spare parts.

Any use of the ice-cube-maker other than for producing ice, using drinking water, is considered
inappropriate.

Modifying or attempting to modify this device, apart from voiding the warranty, is extremely dangerous.

The machine should not be used in the open air or exposed to the rain. Connect to the drinking water
mains.

The machine should be connected using the cable supplied. It is not designed to be connected to a fixed
pipe.

Always disconnect the machine from the mains before carrying out any cleaning or maintenance work.

The electrical base must be in an accessible place.

We recommend the use of filtration in case of low water quality.

Carry out unloading and recovery of materials or waste according to your national regulations on the
matter.

This device can be used by children older than 8 years and persons with impaired physical, sensory or
mental capacities, or who lack experience or knowledge, if they have had supervision or instruction in the
use of the device from a person responsible for their safety. Children should be supervised to ensure that
they do not play with the device. Children cannot do the cleaning and maintenance of the device without
supervision.

Do not store explosive substances such as cans of aerosol with flammable propellant in this device.
1.2 DESCRIPTION
The most important features are:

Modular machine.

Display with LDC screen of 16x2 characters.

Cleaning system included in the electronic programmer.

AISI 304 stainless steel chassis

Anti-jamming injectors installed in 3 rotating collectors.

Pumps without seals (2)

High/low pressure safety gauge.

Tropical-temperature machine. Ready to work up to 43ºC.

TRANSPARENT CUBES with mostly mains water.