Skope 400 A, Instruction Manual

Page: 20 / 68

16
9. Each entire cycle is considered to begin when the production time starts and ends when the
detachment time has finished, at which point a new production cycle begins.
*The hot gas electro-valve GC has to open during 5 seconds before the compressor starts. The remaining
components are stopped, including the compressor.
*Expansion controlled by expansion valve.
5.2 DISPLAY
5.2.1 MACHINE OPERATING STATES
Machine off
The time is shown on the display when the machine is off (no light). When the machine is disconnected from the
power supply the time is lost. When reconnected it starts at 00:00, flashing to indicate that the time is not set.
Start
When the machine is working during the start time, the display will appear as follows:
Detachment
When the machine is working during the detachment time, the display will appear as follows:
At the bottom of the screen it will show the temperature indicated by the SC cycle probe.
Starting…
Harvest