Skope 400 A, Instruction Manual

Page: 44 / 68

40
If the start time is before the actual time, the programmer will begin the next day.
Once the programmer is on, it will continue every day.
After returning to the main menu, to show the programmer being on, the screen will show a
special character that can be chosen. This special character will be present whenever the
programmer is activated, with the machine either off or on (during production, detachment
and alarms).
Once the activation time arrives, the machine will start (point 0 on the illustration), and when
the end time arrives, it has two options:
1. If it is detaching, it will turn off after finishing this.
2. If it is in the production process, the cycle will end, i.e., it will turn off after detachment
has finished.
To deactivate the programmer select the option “Deactivate”. The programmer can be turned
off at any time, turning off the machine to enter the menu. If power is lost, the programmer
will turn off as the time will be reset to zero.
With the programmer activated, two options are available:
1. If the machine has not started and is turned off, you can turn it on with the power button
and work with it, so:

If it is left on, the programmer will turn it off once the programmed hour arrives.

If the machine is turned off before the start time, the programmer will turn it on once
the start time arrives.
2. If the machine is already on and working, it can be turned off with the power button, so:

If it is off before the switch-off time, the programmer won’t use the programmed
switch-off time.

If the machine is started again, the programmer will turn it off when the programmed
time arrives.
Start: 88:88
End: 88:88