Skope 400 A, Instruction Manual

Page: 50 / 68

46
12.8 CONFIGURATION MENU
Access is provided by simultaneously pressing “Up/Down” for 3 seconds. It can be accessed at
any time with the machine on or with the machine off. It allows you to change the working
parameters of the machine. Once in the menu, press the “Up/Down” button to view the
different parameters available.
12.8.1 SET PRODUCTION TIME
The production time can be changed using the arrow buttons and is measured in minutes and
seconds with a resolution of 1 second.
The value can be changed with “Up/Down”. By pressing “OK”, you can store this parameter
and go to the next one. The value will remain stored even if the machine is disconnected from
the mains.
12.8.2 SETPOINT PRODUCTION TEMPERATURE
This parameter allows you to change the setpoint production temperature of the machine. By
pressing the arrows you can increase or decrease ±1ºC with each keystroke. Measured in
degrees centigrade with a 1ºC resolution.
The value can be changed with “Up/Down”. By pressing “OK”, you can store this parameter
and go to the next one. The value will remain stored even if the machine is disconnected from
the mains.
Freezing Time
22:00 (mm:ss)
Freezing Time
-10ºC