MirrorLink
™
Introduction
This chapter contains information on the following subjects:
Connection conditions
54
Start function
54
Operation
55
Settings
55
Function problems
55
First and foremost, pay attention to the safety instructions
» page 7
,
Impor-
tant notes
.
MirrorLink
™
provides a function for the operation of some installed applica-
tions in the communication facility (e.g. telephone, hereinafter referred to only
as facility) by using the device.
Using this function is only for specially designed and certified applications. For
reasons of safety, the operation of some applications while driving is limited or
not possible (function keys of the applications are inactive).
WARNING
■
No objects such as mobile telephone mounts, etc. must be attached to
the covers of the airbag modules or be located within their immediate vicin-
ity.
■
Never leave communication facility in the deployment area of an airbag,
on a seat, on the dash panel or in another area, from which it can be
thrown during a sudden braking manoeuvre, an accident or a collision -
there is a risk of injury. There are storage compartments with lids and if
necessary there is the multimedia storage compartments to hold this
»
Ve-
hicle owner's manual
, chapter
Transport and practical equipment
.
CAUTION
■
MirrorLink
™
Applications that use a mobile data connection, are dependent
on the quality of the signal supplied by your telephone service provider. ŠKODA
accepts no responsibility for the transmitted data volume.
■
An intensive use of the function MirrorLink
™
and the work associated with
applications (e.g., GPS, mobile data, fully-backlit display and the like.) can lead
to battery discharge of the connected facility.
Connection conditions
Read and observe and on page 54 first.
The connection between the facility and the device using the function
MirrorLink
™
is operational under the following conditions.
The ignition is switched on.
The facility supports the function MirrorLink
™
and contains applications
that support this feature.
The display of the equipment is unlocked.
The facility is connected to the USB input
» Fig. 20
on page 34
.
Note
Before connecting the MirrorLink - Functions, unlock the device screen. While
using the function the display may automatically darken or the screen com-
pletely turns off.
Start function
Read and observe and on page 54 first.
›
Press the button
→
™
→
Selection
.
A list of the facilities connected to the USB input is displayed.
›
Select one of the MirrorLink
™
function supporting facilities.
If the facility is separated from the USB cable and the ignition is not off, it au-
tomatically reconnects when a new connection to the device is made.
Note
■
If the facility is connected by means of the function MirrorLink
™
, it cannot be
used as a USB audio source
Media
menu.
■
The list of available facilities and applications, which support the MirrorLink
™
function, can be seed in the ŠKODA Internet pages
www.infotainment.skoda-
auto.com
.
54
Familiarization with the unit
Summary of Contents for Infotainment Navigation Amundsen
