Skoda Infotainment Navigation Amundsen, Operating Instructions Manual

Page: 45 / 88

If there are problems with the availability of the mobile network or with the
Bluetooth
®
function, one of the following messages may appear on the device
display screen.
Message Meaning
Netw. search…
The telephone scans for available
wireless networks.
No network
The telephone has no connection to a
wireless network, if necessary, it does
not support sending information to
the network state.
Rejected by network.
The telephone service provider has
rejected the connection (e.g. not
enough mobile telephone credit, SIM
card blocked, roaming not available).
To use the Bluetooth function,
please switch the ignition on. Switch on the ignition » page 43 ,
conditions for coupling .
Please switch on Bluetooth.
Switch on the Bluetooth
®
function on
the device.
Please connect a mobile telephone.
Connect the telephone with the de-
vice
» page 42 , Pair .
Telephone not available.
There is a problem with the Tele-
phone , contact a specialist workshop.
Telephone is currently not available.
Unknown No.
The telephone did not provide any in-
formation regarding the telephone
service provider. Connect the mobile
telephone again, if necessary, remove
the key for a few minutes
a)
.
a) On vehicles with a starter button, switch off the ignition and open the driver's door.
Pair

Introduction
This chapter contains information on the following subjects:
conditions for coupling
43
Coupling - no telephone connected 43
Coupling - connected telephone 43
Coupling - two telephones connected 44
Coupling - more options of the telephone search 44
Connect telephone to the device 44
Pairing confirmation 45
Delete the telephone from the list of paired devices 45
First and foremost, pay attention to the safety instructions » page 7 , Impor-
tant notes .
During the coupling and connecting process the device can demand the confir-
mation by the Bluetooth
®
profile (e.g., release contact import, release the MAP
profile or the Bluetooth connection
®
player and similar.) The telephone display
should be monitored to acknowledge any possible request.
If the telephone to be paired has several SIM cards, then the primary SIM card
of the telephone is paired with your device.
The coupling procedure is different depending on the number of telephones
associated with the device.
WARNING
The device may require confirmation of certain features in the telephone
when pairing. Therefore do not carry out the pairing process while driving -
there is danger of accidents!

42
Familiarization with the unit