Skoda AMUNDSEN+, Owner'S Manual

Page: 43 / 76

SmartLink
Introductory information

Introduction
This chapter contains information on the following subjects:
Main menu
40
List of connected devices 41
Settings 41
The SmartLink function offers the possibility to display and operate certified
applications of a connected device (such as a telephone) in the device screen.
Depending on the connected device some applications can be started using
the voice activation, via the device screen, using the operating elements on
the device or using the buttons on the multi-function steering wheel.
The voice control of the connected device can be activated by pressing and
holding the button

or by pressing and holding the symbol key

on the
multifunction steering wheel.
For reasons of safety, the operation of some applications while driving is limi-
ted or not possible.
Using the applications in the connected device it is possible to use the naviga-
tion, to make a call, to listed to music or similar things.
The SmartLinkFunction supports the following connection types.
›
Android Auto
™
›
Apple CarPlay
›
MirrorLink
™
The device allows only one active connection.
CAUTION
■
ŠKODA is not responsible for damage to the unit or to the vehicle by the use
of faulty or incorrectly programmed applications in the connected device.
■
Due to the low charging current from the USB input, intensive use of the
SmartLink function can lead to the discharge of the battery of the connected
device.
■
To establish the connection, it is necessary that the date and time values in
the device are set correctly.
Note
■
We recommend that you use extension cords from ŠKODA Original Accesso-
ries.
■
The device saves the last 10 connected devices.
■
With some connected devices, it is necessary that the connected device is
“unlocked” over the entire duration of the connection for trouble-free func-
tioning of the SmartLink function.
Main menu
Fig. 25 Main menu: no connection / example of an active connection
Read and observe on page 40 first.
›
Press the button

→
   
.
If there is no active connection, then the main menu SmartLink » Fig. 25 -

is
displayed.
If there is
an active connection, then the main menu SmartLink » Fig. 25 -

is
displayed.
Main Menu - function Keys
List of connected devices
Disconnection (appears with active connections)
Settings for the menu SmartLink
Function keys of the active connection (after pressing the main menu of
the active connection appears)




1
40
Connectivity