Skoda 2013 Roomster Owner'S Manual Download Page 71

Page: 71 / 214

Storage compartment in the front centre console

Fig. 68

Centre console: Stowage com-
partment

First read and observe the introductory information and safety warn-
ings on page 66.

The open stowage compartment in the centre console

» Fig. 68



storage compartment under the front seat

Fig. 69

Front seat: Stowage compart-
ment

First read and observe the introductory information and safety warn-
ings on page 66.

›

To open the lid, pull the handle

» Fig. 69

›

When closing the lid, hold the handle until the compartment is closed.

WARNING

The storage compartment must always be closed when driving for safety rea-
sons.



CAUTION

The storage compartment is designed for storing small objects of up to 1 kg. in
weight.



Front armrest with storage compartment

Fig. 70

Armrest: Storage compartment/open storage compartment

First read and observe the introductory information and safety warn-
ings on page 66.

Fold the armrest forwards

›

Press the bottom button on the face end of the armrest

» Fig. 70



›

Fold the arm rest forward and release the button again.

Opening the storage compartment

›

Press the top button and fold the cover of the stowage compartment up-
wards

» Fig. 70



Note

The moving space of the arms can be restricted if the armrest is folded forwards.
In city traffic the armrest should not be folded forwards.





Seats and stowing

Summary of Contents for 2013 Roomster























































































































































































































Search results

Summary of Contents for 2013 Roomster

Reviews:

Related manuals for 2013 Roomster

Brands by name

Popular brands

Skoda 2013 Roomster, Owner'S Manual

Search results

Summary of Contents for 2013 Roomster

Reviews:

Related manuals for 2013 Roomster

Brands by name

Popular brands