manualshive.com logo in svg

Skoda 2013 Roomster, Owner'S Manual

The Skoda 2013 Roomster Owner's Manual is available for free download on our website. This comprehensive manual provides all the essential information for owners, allowing them to fully understand and enjoy their vehicle's features and functions. Unlock the full potential of your Skoda 2013 Roomster with this user-friendly manual available at manualshive.com.

Share
Download
background image

Language

You can set the language for the warning and information texts here.

MFD displays

Activate or deactivate certain displays of the multifunction display here.

Time

The time, time format (12 or 24 hour indicator) and the changeover between sum-
mer/winter time can be set here.

Winter tyres

Here, you can set the speed at which an audible signal should sound. This func-
tion is, for example, used for winter tyres where the maximum permissible speed
is lower than the maximum speed of the vehicle.

When exceeding the speed, the following is shown on the information display:

Winter tyres: maximum ... km / h

Units of measurement

The units for the temperature, consumption and distance driven can be set here.

Second speed

The display of the second speed in mph or in km/h can be switched on here

1)

.

Service

Here you can have the remaining kilometres and days until the next service inter-
val displayed, and reset the Service Interval Display.

Factory setting

The information display is returned to its factory settings by selecting the 

Factory

Setting

 menu item.

Door, boot lid and bonnet warning

First read and observe the introductory information and safety warn-
ings   on page 15.

If at least one door is open, or the boot or bonnet is open, the information display
indicates the relevant 

open

 door or boot/bonnet.

An audible signal also sounds if the vehicle is travelling at more than 6 km/h.

Auto Check Control

First read and observe the introductory information and safety warn-
ings   on page 15.

Vehicle condition

Certain functions and conditions of individual vehicle systems are checked contin-
uously when the ignition is switched on and also while driving.

Some error messages and other information are displayed in the information dis-
play. The messages are displayed simultaneously with the symbols in the infor-
mation display or the warning lights in the instrument cluster 

» page 17

.

The 

Vehicle status

 menu item is displayed in the menu if there is at least one er-

ror message. After selecting this menu the first of the error messages is dis-
played. Several error messages are shown on the display under the message e.g.

1/3

. This indicates that the first of a total of three error messages is being dis-

played.

As long as the operational faults are not rectified, the symbols are always indica-
ted again. After they are displayed for the first time, the symbols continue to be
indicated without any extra messages for the driver.

Warning symbols

Engine oil pressure too low

» page 19

Clutches of the automatic gearbox are too
hot

» page 16

Check engine oil level,
engine oil sensor faulty

» page 19

Clutches of the automatic gearbox are too hot

A symbol 

 in the information display indicates that the temperature of the

clutches of the automatic gearbox is too high.

The following is displayed in the information display:

Gearbox overheated. Stop! Owner's manual!

Stop the vehicle, switch off the engine, and wait until the symbol 

 disappears -

risk of gearbox damage! You can continue your journey as soon as the symbol dis-
appears.

1)

Valid for countries where the values are indicated in British measuring units.

16

Using the system

Summary of Contents for 2013 Roomster























































































































































































































Reviews:

No comments

Related manuals for 2013 Roomster

RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
Chevrolet 2013 Spark Owner'S Manual preview
2013 Spark
Brand: Chevrolet Pages: 356
Ford Zephyr 2007 Owner'S Manual preview
Zephyr 2007
Brand: Ford Pages: 272
Pontiac 2004 Sunfire Owner'S Manual preview
2004 Sunfire
Brand: Pontiac Pages: 376
Jeep COMPASS 2018 Owner'S Manual preview
COMPASS 2018
Brand: Jeep Pages: 712
FORM FIT HDW 1779 Installation Instructions preview
HDW 1779
Brand: FORM FIT Pages: 2
FORM FIT SD 13R07-5 Installation Instructions preview
SD 13R07-5
Brand: FORM FIT Pages: 2
Thule Edge Flush Rail Instructions Manual preview
Edge Flush Rail
Brand: Thule Pages: 12
Edelbrock Chevrolet 5783 Installation Instructions preview
Chevrolet 5783
Brand: Edelbrock Pages: 1
FORM FIT 1308 Installation Instructions preview
1308
Brand: FORM FIT Pages: 2
ULTIMATE SPEED 304669 Instructions For Use And Safety Manuallines preview
304669
Brand: ULTIMATE SPEED Pages: 50
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Brand: Valeo Pages: 25
Beper P205DIF100 Manual preview
P205DIF100
Brand: Beper Pages: 52
Ranger design 1525-FTR Installation Manual preview
1525-FTR
Brand: Ranger design Pages: 24
Maserati Grecale 2023 Owner'S Manual preview
Grecale 2023
Brand: Maserati Pages: 302
Toyota Solara guide Owner'S Manual preview
Solara guide
Brand: Toyota Pages: 497
Z Flash OBD-II STALK User Manual preview
OBD-II STALK
Brand: Z Flash Pages: 4

Brands by name

Popular brands

Load more brands