Skoda 2013 Roomster Owner'S Manual Download Page 60

Page: 60 / 214

Boot cover

Fig. 48

Removing the luggage compartment cover/luggage compartment

cover in the lower position

First read and observe the introductory information and safety warn-
ings on page 55.

The boot cover can be removed if you wish to transport bulky goods.

›

Unhook the support straps

» Fig. 48

›

Fold the luggage compartment cover forwards a little.

›

Remove the cover from the holders

by pulling towards the rear, or by lightly

knocking on the underside of the cover in the area between the holders.

›

To reinstall, first of all push the luggage compartment cover into the holders

and then hook the support straps

on the boot lid.

The luggage compartment cover can also be put into the lower position on the
supporting elements

» Fig. 48



The procedure of installing or removing is identical.

In this position you can store smaller objects up on the luggage compartment
cover up to a total weight of 2.5 kg.

WARNING

No objects should be placed on the boot cover, the vehicle occupants could be
endangered if there is sudden braking or the vehicle collides with something.



CAUTION

Please ensure that the heating elements for the rear window heater are not dam-
aged as a result of objects placed in this area.

Note

When opening the boot lid, the luggage compartment cover is lifted up at the
same time- risk that objects placed in this area can slip forward!



Net partition

Fig. 49

Using the net partition behind the front/rear seats

First read and observe the introductory information and safety warn-
ings on page 55.

The net partition can either be installed behind the rear seats or behind the front
seats.

Installing the net partition behind the rear seats

›

Remove the boot cover

» page 58

Boot cover

›

Remove the net partition from the bag.

›

Unfold both parts of the cross rod until they are heard to engage.

›

First of all insert the cross rod into the mount

» Fig. 49

on one side and push

it forward. In the same way, insert the cross rod into the mount

on the other

side of the vehicle.

›

Hang the carabines

at the ends of the belt into the lashing eyes behind the

rear seats.

›

Pull the belt through the tensioning clasp on both sides- first of all on the one
side and then on the other side.





Using the system

Summary of Contents for 2013 Roomster























































































































































































































Search results

Summary of Contents for 2013 Roomster

Reviews:

Related manuals for 2013 Roomster

Brands by name

Popular brands

Skoda 2013 Roomster, Owner'S Manual

Search results

Summary of Contents for 2013 Roomster

Reviews:

Related manuals for 2013 Roomster

Brands by name

Popular brands