Skoda 2013 Roomster Owner'S Manual Download Page 32

Page: 32 / 214

Unlocking the vehicle using the key

Fig. 14

Turning the key for unlocking
and locking the vehicle

First read and observe the introductory information and safety warn-
ings on page 28.

›

Turn the key in the locking cylinder of the driver's door in the direction of travel
(unlocking position)

» Fig. 14

›

Pull the door handle and open the door.

›

All the doors (only the driver's door on vehicles with anti-theft alarm system)
are unlocked.

›

The boot lid is then unlocked.

›

The switched on interior lights come on over the door contact.

›

The safe securing system is deactivated.

›

The windows open while the key

is held

in the unlock position.

›

The warning light in the driver door stops flashing if the car is not fitted with an
anti-theft alarm system

» page 32

Note

If the vehicle is equipped with an anti-theft alarm system, you must insert the key
into the ignition lock and switch the ignition on within 15 seconds after unlocking
the door in order to deactivate the anti-theft alarm system. The

alarm is trig-

gered

if the ignition is

not switched on

within 15 seconds.





Locking the vehicle with the key

First read and observe the introductory information and safety warn-
ings on page 28.

›

Turn the key in the locking cylinder of the driver's door in the opposite direction
of travel (lock position)

» Fig. 14

on page 30.

›

All the doors and the boot lid are locked.

›

The switched on interior lights will switch off over the door contact.

›

The windows close while the key

is held

in the lock position.

›

The safe securing system is immediately activated.

›

The warning light in the driver door begins flashing.

Note

If the driver's door has been opened, the vehicle cannot be locked.



Vehicle locking/unlocking from the inside

Fig. 15

Centre console: Central locking
button

First read and observe the introductory information and safety warn-
ings on page 28.

If the vehicle was not locked from the outside, you can also unlock and lock it
with the rocker switch

» Fig. 15

without the ignition switched on.

Locking all doors and the boot lid

›

Press the button in the area



» Fig. 15

. The symbol



in the button comes on.

Unlocking all doors and the boot lid

›

Press the button in the area



» Fig. 15

. The symbol



in the button is no lon-

ger illuminated.





Using the system

Summary of Contents for 2013 Roomster























































































































































































































Search results

Summary of Contents for 2013 Roomster

Reviews:

Related manuals for 2013 Roomster

Brands by name

Popular brands

Skoda 2013 Roomster, Owner'S Manual

Search results

Summary of Contents for 2013 Roomster

Reviews:

Related manuals for 2013 Roomster

Brands by name

Popular brands