manualshive.com logo in svg

Skoda 2013 Roomster, Owner'S Manual

The Skoda 2013 Roomster Owner's Manual is available for free download on our website. This comprehensive manual provides all the essential information for owners, allowing them to fully understand and enjoy their vehicle's features and functions. Unlock the full potential of your Skoda 2013 Roomster with this user-friendly manual available at manualshive.com.

Share
Download
background image

CAUTION

If the safe securing system is activated

» page 29

, the door opening lever and

the central locking buttons do not operate.

Note

■

In the event of an accident in which the airbags are deployed, the locked doors

are automatically unlocked in order to enable rescuers to gain access to the vehi-
cle.

■

In case of failure of the central locking system, you can only lock and unlock the

driver's door with the key. The other doors and the tailgate can be manually
locked or unlocked.

■

Emergency locking of the door 

» page 28

.

■

Emergency unlocking of the boot lid 

» page 35

.

Individual settings

First read and observe the introductory information and safety warn-
ings   on page 28.

Opening a single door

This selection function makes it possible to only unlock the driver's door. The oth-
er doors remain locked and are only unlocked when the command is repeated.

Automatic locking and unlocking

All the doors and the boot lid are locked automatically once the car reaches a
speed of about 15 km/h.

If the ignition key is withdrawn, the car is then automatically unlocked again. In
addition, it is possible for the driver or front passenger to unlock the car by press-
ing the central locking button 

 

» page 30

.

The doors can be unlocked and opened from the inside by pulling on the opening
lever of the respective door. By the first pull on the opening lever, the door is 

un-

locked

. By the second pull on the opening lever, the door is 

opened

.

Note

You can have the custom settings activated by a specialist garage, if you wish.

Safe securing system

First read and observe the introductory information and safety warn-
ings   on page 28.

The central locking system is equipped with a 

safe securing system

. The door

locks are blocked automatically if the vehicle is locked from the outside. The
warning light flashes for around 2 seconds in quick succession, afterwards it be-
gins to flash evenly at longer intervals. It is not possible to open the doors with
the door handle either from the inside or from the outside. This acts as an effec-
tive deterrent for attempts to break into your vehicle.

The safe securing system can be deactivated within 2 seconds by double locking
the vehicle.

If the safe securing system is not operating, the warning light in the driver door
flashes for about 2 seconds fast, goes out and starts to flash evenly at longer in-
tervals after about 30 seconds.

The safe securing system is activated again the next time the vehicle is unlocked
and locked.

If the vehicle is locked and the safe securing system is deactivated, the door can
be unlocked and opened from the inside by pulling on the opening lever of the
respective door. By the first pull on the opening lever, the door is 

unlocked

. By

the second pull on the opening lever, the door is 

opened

.

WARNING

If the vehicle is locked from the outside and the safe securing system is acti-
vated, there must not be any person in the vehicle as it is then no longer pos-
sible to open either a door or a window from the inside. The locked doors
make it more difficult for rescuers to get into the vehicle in an emergency –
risk to life!

Note

■

The anti-theft alarm system is activated when the vehicle is locked even if the

safe securing system is deactivated. The interior monitor is however not activa-
ted.

■

You will be informed that the safe securing system is activated after the vehicle

is locked by the 

CHECK DEADLOCK

 message on the instrument cluster display.

The Check deadlock! message 

will appear on vehicles that are equipped with an

information display. Owner's manual!

29

Unlocking and locking

Summary of Contents for 2013 Roomster























































































































































































































Reviews:

No comments

Related manuals for 2013 Roomster

Daihatsu S85 Wiring Diagrams preview
S85
Brand: Daihatsu Pages: 41
Daihatsu S85 Workshop Manual preview
S85
Brand: Daihatsu Pages: 268
HALE MM-03 Driver Manual preview
MM-03
Brand: HALE Pages: 44
Vauxhall Ampera Owner'S Manual preview
Ampera
Brand: Vauxhall Pages: 199
RAM CHASSIS CAB 3500 2017 Quick Reference Manual preview
CHASSIS CAB 3500 2017
Brand: RAM Pages: 16
Mercedes-Benz AMG E-Class Supplement Manual preview
AMG E-Class
Brand: Mercedes-Benz Pages: 54
Q Mobility Group Q Access Alpha GSE 2023 Installation Manual preview
Q Access Alpha GSE 2023
Brand: Q Mobility Group Pages: 9
Porsche 01-B Web Application Manual preview
01-B
Brand: Porsche Pages: 313
Fab Fours VI-COWL Installation Instructions Manual preview
VI-COWL
Brand: Fab Fours Pages: 19
Lit Lightz RGBW Rock Lights Setup Manual preview
RGBW Rock Lights
Brand: Lit Lightz Pages: 3
M7 SPEED AGS-R2 Manual preview
AGS-R2
Brand: M7 SPEED Pages: 6
JKS JKSOGS960 Installation Instructions Manual preview
JKSOGS960
Brand: JKS Pages: 6
Safe Fleet Prime Design VBI-FT31B Assembly Instructions Manual preview
Prime Design VBI-FT31B
Brand: Safe Fleet Pages: 12
Bilstein E4-WM5-Y479A00 Mounting Instruction preview
E4-WM5-Y479A00
Brand: Bilstein Pages: 7
Grillo PK 1400 Operator'S Manual preview
PK 1400
Brand: Grillo Pages: 71
Brodit Getac T800 Quick Start Manual preview
Getac T800
Brand: Brodit Pages: 2
Saturn 2009 OUTLOOK Owner'S Manual preview
2009 OUTLOOK
Brand: Saturn Pages: 432
Edelbrock Honda XR400 Instruction Supplement preview
Honda XR400
Brand: Edelbrock Pages: 2

Brands by name

Popular brands

Load more brands