manualshive.com logo in svg

Skoda 2013 Roomster, Owner'S Manual

The Skoda 2013 Roomster Owner's Manual is available for free download on our website. This comprehensive manual provides all the essential information for owners, allowing them to fully understand and enjoy their vehicle's features and functions. Unlock the full potential of your Skoda 2013 Roomster with this user-friendly manual available at manualshive.com.

Share
Download
background image

Note

The fuel tank has a capacity of about 

55 litres

, containing a reserve of approx.

7 litres

.

Unleaded petrol

First read and observe the introductory information and safety warn-
ings   on page 154.

Your vehicle can only be operated with 

unleaded fuel

 that complies with the

standard 

EN 228

 (in Germany: 

standard DIN 51626-1

 or 

E10

 for unleaded fuel with

an octane rating of 

95

 RON and 

91

 RON or 

DIN 51626-2

 or 

E5

 for unleaded fuel

with the octane rating 

95

 RON and 

98

 RON).

Prescribed fuel - unleaded fuel 95/91 RON

Use unleaded fuel with the octane rating 

95

 RON. Unleaded petrol 

91

 RON can al-

so be used but results in a slight loss in performance.

Prescribed fuel - unleaded petrol min. 95 RON

Use unleaded fuel with the octane rating 

95

 RON.

In case of necessity, you can refuel with petrol with the octane rating 

91

 RON if

petrol with the octane rating 

95

 RON is not available.

Even in the event of an emergency, petrol of a lower octane number than 

91

 RON

must not be used, otherwise the engine can be severely damaged!

Unleaded petrol with higher octane number

Unleaded petrol that has a higher octane number than that required by the en-
gine can be used without limitations.

On vehicles with prescribed unleaded petrol 

95/91

 RON, the use of petrol with a

higher octane number than 

95

 RON does not result in a noticeable power in-

crease or a lower fuel consumption.

On vehicles using prescribed unleaded petrol of 

min. 95

 RON, the use of petrol

with a higher octane number than 

95

 RON can increase the power and reduce

fuel consumption.

Prescribed fuel - unleaded petrol 98/(95) RON

Use unleaded fuel with the octane rating 

98

 RON. Unleaded petrol 

95

 RON can

also be used but results in a slight loss in performance.

In case of necessity, you can refuel with petrol with the octane rating

91

 RON of

unleaded fuel with octane rating 

98

 RON or 

95

 RON is not available.

Even in the event of an emergency, petrol of a lower octane number than 

91

 RON

must not be used, otherwise the engine can be severely damaged!

Fuel additives

Only use unleaded petrol, which complies with the standard EN 228 (in Germany:
standard DIN 51626-1 or E10 for unleaded fuel with an octane rating of 95 RON
and 91 RON or DIN 51626-2 or E5 for unleaded fuel with an octane rating of
95 RON and 98 RON), as these meet all of the requirements for fault-free engine
operation. We therefore recommend that no fuel additives are used.

CAUTION

■

All ŠKODA vehicles with petrol engines must only be operated with unleaded

petrol. Just filling the tank with leaded petrol once will damage the exhaust sys-
tem!

■

If, in an emergency, the vehicle has to be refuelled with petrol of a lower octane

number than the one prescribed, the journey must only be continued at medium
engine speeds and a low engine load. Driving at high engine revs or a high engine
load can severely damage the engine! Refuel using petrol of the prescribed oc-
tane number as soon as possible.

■

Engine parts can be damaged if petrol with a lower octane number than the one

prescribed is used.

■

In no case may fuel additives with metal components be used, especially not

with manganese and iron content. Do not use any LRP (lead replacement petrol)
fuels with metal parts – risk of serious damage to parts of the engine or the ex-
haust system!

■

Do not use any fuels with metal parts – risk of serious damage to parts of the

engine or the exhaust system!

■

The use of unsuitable fuel additives can cause considerable damage to parts of

the engine or the exhaust system.

Diesel fuel

First read and observe the introductory information and safety warn-
ings   on page 154.

Your vehicle can only be operated with 

diesel fuel

 which complies with the stand-

ard 

EN 590

 (standard 

DIN 51628

 in Germany, standard 

ÖNORM C 1590

 in Austria,

GOST R 52368-2005/EN 590:2004

 in Russia).

All diesel engines can be operated with diesel fuel with a 

maximum

 content of

7 % bio-fuel 

(B7)

, which complies with the standard 

DIN 52638

 in Germany (in

Austria 

C 1590

, in France 

EN 590

).

155

Inspecting and replenishing

Summary of Contents for 2013 Roomster























































































































































































































Reviews:

No comments

Related manuals for 2013 Roomster

B-Speech B-Speech Prim Manual preview
B-Speech Prim
Brand: B-Speech Pages: 18
DANA TM4 SUMO MD MV Installation Manual preview
TM4 SUMO MD MV
Brand: DANA Pages: 42
dallara F305 Manual preview
F305
Brand: dallara Pages: 37
Yakima BOA Installation Instructions Manual preview
BOA
Brand: Yakima Pages: 8
Kia Picanto 2015 Quick Reference Manual preview
Picanto 2015
Brand: Kia Pages: 10
Trailboss QTHD519L Fitting Instructions Manual preview
QTHD519L
Brand: Trailboss Pages: 8
Atwood Lippert Components LEVELEGS MPD 66385 Manual preview
Lippert Components LEVELEGS MPD 66385
Brand: Atwood Pages: 6
BMW 65 41 2 152 528 Installation Instructions Manual preview
65 41 2 152 528
Brand: BMW Pages: 21
EUFAB 11556 Operating Instructions Manual preview
11556
Brand: EUFAB Pages: 52
minnid 1.240.344 Operating Instructions Manual preview
1.240.344
Brand: minnid Pages: 44
B-Speech Sima User Manual preview
Sima
Brand: B-Speech Pages: 4
STO N SHO SNS135a Installation Procedures Manual preview
SNS135a
Brand: STO N SHO Pages: 7
iArmor EDGE IA-W208 Manual preview
EDGE IA-W208
Brand: iArmor Pages: 6
Oldsmobile 2003 Alero Owner'S Manual preview
2003 Alero
Brand: Oldsmobile Pages: 354
E&G Classics Black Ice Mesh Instruction Manual preview
Black Ice Mesh
Brand: E&G Classics Pages: 4
Horn Tools HJIMRR02FIT Mounting Instructions preview
HJIMRR02FIT
Brand: Horn Tools Pages: 12
Safe Fleet Prime Design VBI-FT31B Assembly Instructions Manual preview
Prime Design VBI-FT31B
Brand: Safe Fleet Pages: 12
Opel 2011 Astra J Owner'S Manual preview
2011 Astra J
Brand: Opel Pages: 242

Brands by name

Popular brands

Load more brands