manualshive.com logo in svg

Skoda 2013 Roomster, Owner'S Manual

The Skoda 2013 Roomster Owner's Manual is available for free download on our website. This comprehensive manual provides all the essential information for owners, allowing them to fully understand and enjoy their vehicle's features and functions. Unlock the full potential of your Skoda 2013 Roomster with this user-friendly manual available at manualshive.com.

Share
Download
background image

Illuminated storage compartment on the passenger side

First read and observe the introductory information given on page 43.

›

When opening the flap of the storage compartment on the front passenger side
the lighting in the storage compartment comes on.

›

The light switches on automatically when the parking light is switched on and
goes out when the flap is closed.

Luggage compartment light

First read and observe the introductory information given on page 43.

The light comes on automatically when the boot lid is opened. If the lid remains
open for more than about 10 minutes, the boot light switches off automatically.

Visibility

Introduction

This chapter contains information on the following subjects:

Rear window heater

44

Sun visors

45

sunshade

45

Rear window heater

Fig. 28 

Switch for rear window heater

First read and observe the introductory information given on page 44.

›

The rear window heater is switched on or off by pressing the symbol switch

 

» Fig. 28

; the warning light in the switch lights up or goes out.

The rear window heater only operates when the engine is running.

The rear window heater 

switches

 

off

 automatically after 7 minutes.

For the sake of the environment

The heating should be switched off as soon as the window is de-iced or free from
mist. The reduced current consumption will have a favourable effect on fuel econ-
omy 

» page 106

, 

Saving electricity

.

Note

If the on-board voltage drops, the rear window heater switches off automatically,
in order to provide sufficient electrical energy for the engine control 

» page 168

,

Automatic load deactivation

.

44

Using the system

Summary of Contents for 2013 Roomster























































































































































































































Reviews:

No comments

Related manuals for 2013 Roomster

Jacob Jensen Electronic Parking Disc II User Manual preview
Electronic Parking Disc II
Brand: Jacob Jensen Pages: 28
Toyota RX450h 2010 Emergency Response Manual preview
RX450h 2010
Brand: Toyota Pages: 35
Velleman CAMCOLC1N User Manual preview
CAMCOLC1N
Brand: Velleman Pages: 6
Jeep Cherokee 2000 Service Manual preview
Cherokee 2000
Brand: Jeep Pages: 1528
SAAS StreetLine Series Installation Instructions preview
StreetLine Series
Brand: SAAS Pages: 4
Paccar DAF CHARGEMAX 90 User Manual preview
DAF CHARGEMAX 90
Brand: Paccar Pages: 40
Fab Fours H4550 Installation Instructions Manual preview
H4550
Brand: Fab Fours Pages: 13
FALCON RIDGE HU-4421-XL-SDK01 Instructions For Installation And Care preview
HU-4421-XL-SDK01
Brand: FALCON RIDGE Pages: 5
Omix-Ada 11704.05 Owner'S Manual preview
11704.05
Brand: Omix-Ada Pages: 6
Safe Fleet RVS systems RVS-M641 Instruction Manual preview
RVS systems RVS-M641
Brand: Safe Fleet Pages: 24
Oypla Leisure 4269 User Manual preview
4269
Brand: Oypla Leisure Pages: 4
Xpresskit DBALL2-HK7 Installation Manual preview
DBALL2-HK7
Brand: Xpresskit Pages: 18
Thule 1061-1-011 Fitting Instructions preview
1061-1-011
Brand: Thule Pages: 3
Ford ALCON 1968 Owner'S Manual preview
ALCON 1968
Brand: Ford Pages: 52
Mercedes-Benz Vito Taxi 2011 Operation Manual preview
Vito Taxi 2011
Brand: Mercedes-Benz Pages: 10
Alfa Romeo Giulietta 2.0 JTDM Manual preview
Giulietta 2.0 JTDM
Brand: Alfa Romeo Pages: 14
Scosche MAGICGRIP MGQDWD-CPO Instructions Manual preview
MAGICGRIP MGQDWD-CPO
Brand: Scosche Pages: 12
Prorack K349 Fitting Instructions Manual preview
K349
Brand: Prorack Pages: 13

Brands by name

Popular brands

Load more brands