manualshive.com logo in svg

Skoda 2013 Roomster, Owner'S Manual

The Skoda 2013 Roomster Owner's Manual is available for free download on our website. This comprehensive manual provides all the essential information for owners, allowing them to fully understand and enjoy their vehicle's features and functions. Unlock the full potential of your Skoda 2013 Roomster with this user-friendly manual available at manualshive.com.

Share
Download
background image

Seat belt height adjuster on the front seats

Fig. 115 

Front seat: Seat belt height ad-
juster

First read and observe the introductory information and safety warn-
ings   on page 127.

The seat belt height adjuster makes it possible to adjust the routing of the front
seat belts in the area of the shoulder to the body size.

›

Press the height adjuster and move up or down in the desired direc-
tion 

» Fig. 115

.

›

Then pull firmly on the belt to ensure that the seat belt height adjuster has cor-
rectly locked in place.

Seat belt for the rear middle seat

First read and observe the introductory information and safety warn-
ings   on page 127.

The seat belt for the rear middle seat is anchored in the area of the boot on the
left side of the headliner.

Fasten

›

Pull the belt with both lock tongues out of the headliner mount.

›

Insert the lock tongue at the end of the belt into the belt buckle on the left side
until it is heard to lock in place.

›

Pull the second lock tongue, which is moveable on the seat belt, over the chest
and insert it into the belt buckle on the right side until it is heard to lock in
place.

›

Pull on the seat belt to check that both lock tongues are securely engaged in
the locks.

The belt tongues for the rear middle seat are shaped differently so that they only
fit into the correct belt buckle. If you are not able to insert a lock tongue into the
wrong belt lock you probably tried to put it into the wrong buckle.

Release

›

Take off the safety belt in the reverse order to how you fasten it.

›

Guide the belt back by hand so that the webbing rolls up easily, the seat belt is
not twisted and the trim panel is not damaged.

WARNING

■

After releasing the seat belt, hold it tight and let it slowly reel up until both

locking tongues lock into the headliner mounting and are secured with a mag-
net - risk of injury.

■

Never unlock both lock tongues simultaneously.

Inertia reels and belt tensioners

Introduction

This chapter contains information on the following subjects:

Inertia reels

130

Belt tensioners

131

Inertia reels

First read and observe the introductory information given on page 130.

Each seat belt is equipped with an inertia reel.

When pulling slowly on the seat belt, the belt can move freely. When pulling
sharply on the seat belt, the movement is locked by the inertia reel.

The belts also lock when full braking, when the car accelerates, when driving
downhill and when cornering.

130

Safety

Summary of Contents for 2013 Roomster























































































































































































































Reviews:

No comments

Related manuals for 2013 Roomster

Federal Signal Corporation 7000 Assembly Instructions Manual preview
7000
Brand: Federal Signal Corporation Pages: 13
Camcar 40052 Mounting Instructions preview
40052
Brand: Camcar Pages: 6
Lancia Delta Owner'S Handbook Manual preview
Delta
Brand: Lancia Pages: 276
T-Tech TT100 User Manual preview
TT100
Brand: T-Tech Pages: 38
Jabra FREEWAY Datasheet preview
FREEWAY
Brand: Jabra Pages: 2
Jabra BT330 User Manual preview
BT330
Brand: Jabra Pages: 38
LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
Parrot CK 3000 Evolution Specifications preview
CK 3000 Evolution
Brand: Parrot Pages: 2
PUTCO MOLLE PANELS RAM 2500 Instruction Manual preview
MOLLE PANELS RAM 2500
Brand: PUTCO Pages: 4
Westfalia Portilo 350000 Installation And Operating Instructions Manual preview
Portilo 350000
Brand: Westfalia Pages: 18
TBC DPI1K User Manual preview
DPI1K
Brand: TBC Pages: 12
REVCAMUK MON16AHD Instructions preview
MON16AHD
Brand: REVCAMUK Pages: 4
Whispbar K728W Fitting Instructions Manual preview
K728W
Brand: Whispbar Pages: 85
Maserati Gransport Owner'S Manual preview
Gransport
Brand: Maserati Pages: 210
OnStar liveon Owner'S Manual preview
liveon
Brand: OnStar Pages: 22
Dakota Digital LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne... Installation Instructions preview
LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne...
Brand: Dakota Digital Pages: 3
Brodit ProClip 854208 Manual preview
ProClip 854208
Brand: Brodit Pages: 2

Brands by name

Popular brands

Load more brands