Ski-Doo MX Z TNT 600 HO E-TEC, Operator'S Manual, Page: 88 / 120

mmo2008-003-045_a
1. Arrow pointing the front of vehicle
NOTE: If your drive belt was broken
while riding, you will need to open
the driven pulley sheaves first before
trying to install a new belt. Refer to
DRIVE BELT REMOVAL for procedure.
Install drive belt.
Set drive belt in drive pulley then in
driven pulley starting at the bottom.
mmr2008-042-002
When drive belt is in position, driven
pulley sheaves needs to be adjusted
to obtain proper drive belt adjustment.
To adjust driven pulley sheaves, use
the following tool from tool kit.
mmo2008-003-042
SUSPENSION ADJUSTMENT TOOL
Turn adjustment ring counterclock-
wise (± 1 turn) then, manually rotate
drive belt to position it properly inside
pulley sheaves.
Repeat this proce-
dure until proper belt adjustment is
obtained.
mmr2008-042-001_b
1. Suspension adjustment tool
2. Adjustment ring
mmo2008-003-046_a
MANUALLY ROTATE DRIVE BELT
1
mmo2008-003-078_a
PROPER ADJUSTMENT
1. Drive belt cord flush with pulley edge
NOTE: If correct adjustment is
unattainable, contact an authorized
SKI-DOO dealer.
When the drive belt is properly adjust-
ed, ensure that the swivel ring rest
against the driven pulley cam.
_____________________
85