Ski-Doo MX Z TNT 600 HO E-TEC, Operator'S Manual, Page: 51 / 120

15) Engine Cut-Out Switch
Push-pull type switch.
To stop the engine in an emergency,
select OFF position (down) and simul-
taneously apply the brake.
To restart, button must be at the ON
position (up).
mmo2007-009-038_a
OFF POSITION
mmo2007-009-038_b
ON POSITION
All operators of the snowmobile
should familiarize themselves with
the function of this device by using
it several times on first outing and
whenever stopping the engine there-
after. This engine cut-out procedure
will become a reflex and will prepare
operators for emergency situations
requiring its use.

WARNING
If the switch has been used in an
emergency caused by a suspect-
ed malfunction, the source of the
malfunction should be determined
and corrected before restarting en-
gine. See an authorized SKI-DOO
dealer for servicing.
16) Rewind Starter Handle
Auto-rewind type located on right
hand side of snowmobile. To engage
mechanism, pull handle slowly until a
resistance is felt then pull vigorously.
Slowly release handle.
mmo2008-008-026_a
1. Rewind starter handle
17) Hood and Side Panels
Hood
To open hood, release hood retaining
pins then slide hood towards the front
of the vehicle.
mmo2008-003-015_a
Step 1: Release retaining pins
Step 2: Slide hood towards the front
Side Panels
To open a side panel, stretch and un-
hook the latches.
48
______________________