Ski-Doo MX Z TNT 600 HO E-TEC, Operator'S Manual, Page: 54 / 120

mmo2008-003-062_a
1. Belt guard
2. Brake disk guard
23) Track

WARNING
Never stud a track that has not
been
approved for studs. In-
stalling studs on an unapproved
track could increase the risk of the
track tearing or severing, possibly
resulting in serious injury or death.

WARNING
You may stud the track on this ve-
hicle model. However, you MUST
only use the BRP approved type
stud. DO NOT EVER use conven-
tional studs as the track thickness
is thinner then other standard
tracks. The stud could tear off of
track and separate from vehicle
posing a potential risk of severe
injury or death.
See an autho-
rized SKI-DOO dealer for current
specific studding availability and
applications.
Depending on the model of snowmo-
bile that you own, your vehicle may
come with a track that has been ap-
proved by BRP for special studs instal-
lation, a track for which the manufac-
turer permits the installation of special
studs or a track for which the manu-
facturer forbids it.
Tracks approved for the installation of
special studs have a stud symbol (see
illustration) molded into the track sur-
face, and tracks not approved bear
a forbidden stud symbol (see illustra-
tion).
Before proceeding with the instal-
lation of special studs on tracks
you must contact your authorized
SKI-DOO snowmobile dealer for cur-
rent specific studding availability and
applications. You must first acquaint
yourself with the safety instructions
related to the studding of tracks, found
in the section entitled
TRACTION EN-
HANCING PRODUCTS in the SAFETY
INFORMATION section at the begin-
ning of this guide. This section also
provides other important information
that you must consider before having
studs installed on a track.
A00A 8 KA
1 2
TRACK SYMBOLS
1. Approved
2. NOT Approved
24) Seat Latch
Seat can be removed to have access
to the Operator's Guide (located in
seat base) or for maintenance purpos-
es.
Seat latch is located at the front of the
seat.
_____________________
51