SPECIAL OPERATING INSTRUCTIONS
Riding at High Altitudes
or Sea Level
CAUTION:
Failure to re-calibrate
may cause serious engine damage.
Refer to an authorized SKI-DOO dealer
for proper calibration modifications.
MODEL
FACTORY
CALIBRATED
FOR
PARTS
REPLACEMENT/
ADJUSTMENTS
REQUIRED WHEN
ALTITUDE IS
MX Z
Sea level
Above
600 m (2000 ft)
Emergency Starting
The engine can be started with the
emergency starter rope supplied with
the tool kit.
Remove belt guard.
WARNING
Do not wind starting rope around
your hand. Hold rope by the han-
dle only. Do not start the snowmo-
bile by the drive pulley unless it is
a true emergency situation. Have
the snowmobile repaired as soon
as possible.
mmo2008-005-008_a
Attach one end of emergency rope to
rewind handle.
NOTE:
The spark plug socket can be
used as an emergency handle.
mmo2008-005-007
Attach the other end of emergency
rope to the starter clip supplied in the
tool kit.
mmo2008-005-009
Hook up clip on drive pulley.
mmo2008-005-012_a
1. Clip installation location
Wind the rope tightly around drive pul-
ley. When pulled, pulley must rotate
counterclockwise.
_____________________
63
Summary of Contents for MX Z TNT 600 HO E-TEC
