97-12
Page 17 of 17
TECHNICAL DATA
TECHNICAL DATA
➀
Engine speed at which maximum power is achieved.
➁
At 6000 RPM (engine cold) with headlamp turned on.
➂
Force applied midway between pulleys to obtain specified deflection.
MODEL
SKANDIC SWT
Engine Type
ROTAX 503
Maximum HP RPM
➀
±100 RPM
6500
Rotary Valve
P/N
N.A.
Carburetor Type
VM 32
Main Jet
230
Needle Jet
159 O-0
Pilot Jet
25
Needle Identification — Clip Position
6DH8-4
Slide Cutaway
3.0
Float Adjustment
mm (in)
23.9 (.94)
Air Screw Adjustment
±1/32 turn
1.5
Idle Speed
RPM
1650
Gas Grade/Pump Octane Number
(R + M)/2
Regular Unleaded/87
Gas/Oil Ratio
Oil Injection
Ignition Timing BTDC
➁
mm (in)
1.66 (.065)
Trigger Coil Air Gap
mm
(in)
0.45 - 0.55
(.018 - .022)
Gear Ratio
1st Gear 1:4.41
2nd Gear 1:3.19
Engagement Speed
±100 RPM
2900
Drive Pulley Calibration Screw Position
4
Pulley Distance
Z
(+0, –1) mm
(+0, –1/32) in
32.75
(1-9/32)
Offset
X
± 0.4 mm
(± 1/64 in)
36.25
(1-27/64)
Y
Dimension Y must exceed X from1 mm (1/32 in)
to 2 mm (5/64)
Drive Belt
Adjustment
Deflection
mm
(in)
32
(1-1/4)
Force
➂
kg (lbf)
11.34 (25)
Driven Pulley Preload
kg (lbf)
13.23
Drive Chain Tension
N.A.
Track Adjustment
Deflection
mm (in)
40 to 45 (1.5 to 1.7)
Force
Kg (lbf)
7.3 (16.1)
Carrying Capacity (Pas Luggage)
1 Pas 125 kg or
2 Pass 50 kg
Towing Capacity (on ice or snow)
200 kg
