97-2
Page 5 of 16
TECHNICAL DATA
PARTS INSTALLATION
FRONT SUSPENSION
Except Skandic 380/500
Cut locking tie retaining exhaust spring to exhaust
support.
1. Lug in recess
2. Locking tie
Lift front of vehicle and block safely.
Remove and discard shipping brackets from sus-
pension. Discard spring clips, keep screws.
Secure shock absorbers to suspension with their
adjusting ring, if equipped, at bottom.
NOTE:
Position screw heads toward front.
Properly position exhaust suppport on chassis
making sure that its lug rests in chassis recess.
Hook up exhaust spring.
TYPICAL—RIGHT SIDE SHOWN
1. Shock absorber (2) (engine compartment) adjusting ring, if equipped, at bottom
2. Screw M10 x 1.5 x 60 (2) (P/N 222 0060 65) (on suspension)
3. Screw M10 x 1.5 x 55 (2) (P/N 222 0055 65)(on suspension)
4. Flanged elastic nut (4) (P/N 228 5010 45) (section no.1 or 5) torque to 48 N•m (35 lbf•ft)
A03C19A
1
2
A06G0JS
1
2-4
3-4
