Page 6 of 16
97-9
TECHNICAL DATA
PARTS INSTALLATION
FRONT SUSPENSION
Cut locking tie retaining exhaust spring to exhaust
support.
GT 583 SHOWN
1. Lug in recess
2. Locking tie
All Models
Lift front of vehicle and block safely.
Remove and discard shipping brackets from sus-
pension. Discard spring clips, keep screws.
Secure shock absorbers to suspension with their
adjusting ring at bottom.
NOTE:
Position screw heads toward front.
Properly position exhaust support on chassis
making sure that its lug rests in chassis recess.
Hook up exhaust spring.
NOTE:
On GT 500 model, hook up exhaust spring
on mid-hole.
TYPICAL — RH SIDE SHOWN
1. Shock absorber (2) (engine compartment)
2. Screw M10 x 1.5 x 60 (2) (P/N 222 0060 65) (on suspension)
3. Screw M10 x 1.5 x 55 (2) (P/N 222 0055 65) (on suspension)
4. Nut M10 x 1.5 (2) (P/N 228 5010 45) (section no. 3). Torque to 48 N•m (35 lbf•ft)
1
A03C1QA
2
A06G0JS
1
2-4
3-4