Page 6 of 17
97-11
TECHNICAL DATA
PARTS INSTALLATION
FRONT SUSPENSION
All Models
Lift front of vehicle and block safely.
Remove and discard shipping brackets from suspension. Discard spring clips, keep screws.
Secure shock absorbers to suspension with their adjusting ring at bottom.
NOTE:
Position screw heads toward front.
TYPICAL — RH SIDE SHOWN
1. Shock absorber (2) (engine compartment)
2. Screw M10 x 1.5 x 60 (2) (P/N 222 0060 65) (on suspension)
3. Screw M10 x 1.5 x 55 (2) (P/N 222 0055 65) (on suspension)
4. Nut M10 x 1.5 (2) (P/N 228 5010 45) (section no. 3). Torque to 48 N•m (35 lbf•ft)
A06G0JS
1
2-4
3-4