97-12
Page 7 of 17
PARTS INSTALLATION
REAR SUSPENSION
Secure front arm upper axle of rear suspension
using 2 M10 x 30 screws in plastic bag under the
seat.
Apply Loctite 242 on threads and torque screws
to 58 N•m (43 lbf•ft).
1. Torque screw on each side to 58 N•m (43 lbf•ft)
Secure rear arm using previously removed
screws.
Apply Loctite 242 on threads and torque screws
to 58 N•m (43 lbf•ft).
TECHNICAL DATA
PARTS INSTALLATION
FRONT SUSPENSION
Remove long bolts that compresses front suspen-
sion on both sides.
1. Remove and discard long bolt
Install 2 plastic bushings into shock absorber eye-
let.
Stretch shock to its maximum.
Slide shock absorber onto bottom of ski leg until
shock rod goes through cap hole.
Loosely install washer and nut on shock rods,
keeping at least 1/4 in (5 mm) of free play.
A22F12A
1
A22G0HB
1
