Sizewise Bari Rehab Platform 3 Series User Manual Download Page 23

Page: 23 / 74

RSS Operating Instructions
Hand Control

The hand control has glow-in-the-dark features; in case of power outages operation is not impaired.

LCD Display –

Lighted display shows the weight and allows the navigation of on-screen

menus.

Microphone –

Use to record a message for the voice alarm.

LED Indicators –

Green lights indicate what setting or function is selected.

Bed Exit Button –

Use to set the bed exit alarm.

Enter Button –

Use for making a selection when in the main and sub menus.

Protocol Timer Button –

Use to set the protocol reminder.

Zero Button –

Use for zeroing the scale and establishing the tare weight (base weight).

Sound Level Button –

Use for selecting low, medium and high volume.

Up/Down Arrow Menu Buttons

–

Use for accessing the menu and making adjustments

to menu items.

Back Button –

Press this button once to go to the previous menu or press and hold this

button for 3 seconds at any time to go back to the Home Screen no matter what menu is
displayed.

Summary of Contents for Bari Rehab Platform 3 Series











































































Search results

Summary of Contents for Bari Rehab Platform 3 Series

Reviews:

Related manuals for Bari Rehab Platform 3 Series

Brands by name

Popular brands

Sizewise Bari Rehab Platform 3 Series, User Manual

Search results

Summary of Contents for Bari Rehab Platform 3 Series

Reviews:

Related manuals for Bari Rehab Platform 3 Series

Brands by name

Popular brands