18
Bed Set-Up
1. Position both ends of the bed so that the sections are lined
up with each other.
2. Insert a 5/16”-18 x 2 1/2” long Grade 8 bolt (A) in the
bottom holes, 2 places. Lift both sections of the bed and
insert the brackets (B) on section A, behind the bolts on
section B. Slowly lower the two sections.
NOTE
: For ease of assembly it may be necessary to have
two people assemble the bed.
3. Install the 5/16”-18 x 2 1/2” long Grade 8 bolts (C)
through the top holes on the brackets to lock the two
sections together. Install and tighten the nuts on the 4
bolts.
WARNING:
Failure to securely fasten the
four bolts in place during bed set-up could
result in patient or user injury as well as
damage to equipment or other property.
4. Locate the headboard and footboard; mount them on their respective posts.
The headboard mount should be bolted onto the
bed frame on the outer receptacles.
The footboard mount should be bolted onto the bed
frame on the inner receptacles.
